Andrew_3Dfacture

About

Username
Andrew_3Dfacture
Joined
Visits
1,439
Last Active
Roles
Member, Moderator, Backers

Activity

  • pgibouin
    Hi Andrew,

    I have checked the printer and evrything seem OK, the videoprojector is working fine, the printer fan is working fine, the electronic card inside the printer seem OK with green led on when I plug in the power cord, the motor is responding fine for calibration with Z axis, so, it seems the only thing to change is the acrylic cover which was broken when I have received the printer from DHL. I have also the 4 screws for videoprojector protection which are missing.

    By security, I would prefer to wait to receive the cover before starting a real print because of possible resin projection outside the printer in case of problem.

    Thanks,

    Pierre Gibouin
    November 2015
  • Kaan
    Andrew

    please see also this picture!

    http://i.imgur.com/HkP5iEv.jpg
    November 2015
  • Kaan
    ANDREW!!!

    "HELP"

    like I explained yesterday, the linear stage did not move the platform to the upper 0 position. This morning I checked it again. It does not work.
    Something is wrong with the left side Rod of the linear stage. The cylinder (cone) is sticked to the rod and the motor will not move it. I released the cone and moved the platform manually down so I can inspect it freely.Tryed to move it bye hand to take it out and see if something is blocking from the inside. But it was impossible to take it out by hand. I took it out with a wood hammer and removed it from the top side of the machine.

    This Cone is to narrow in the inside (I tried to check with the other rod but even there it will not move (I made some new lubrication but definitely this rod is to small) 

    I was wondering if the platform had some defects too because of the middle screw (because yesterday when I type in the G28 Z command the motor was working at least 5 minutes and trying to push the platform upwards but the platform didn't moved) So I removed it but I did not realise that there is some kind of bearing inside (all the bearing balls are apart now.

    Please let me know how to fix the bearing and please arrange a working cylinder cone. It would be not difficult for me to contact th guys in China as I am in Hong Kong.

    Awaiting your fast feedback







    November 2015
  • Kaan
    I have a problem with the linear stage.After 2 days of trying to make the machine work correctly, I printed 3 small objects when I typed in the command G28 Z the linear stage moved up around 5 cm and stopped moving but the motor and rod still moving.

    I was trying several tamest reset the machine but I think there is some mechanic problem.

    How canisejd you a video of the problem??



    November 2015
  • YUJI

    Hi Andrew, Could you please update my profile to backer status?

    Thank you

    October 2015
  • YUJI
    I received a Draken 
    Thank you
    Do you projector is when shipping time?
    October 2015
  • Akshay
    Please add me as an ultimate backer. I don't have the information that backers get about shipping and invoicing etc ..
    October 2015
  • Akshay
    Could you please update my profile to backer.
    October 2015
  • kbvpro
    I was wondering if I can get the spec on the VAT. I want to see if I can design a PSA out of metal and glass. Need something to do while I'm waiting for my Draken
    September 2015
  • Thijs
    Hey Andrew, I haven't received an invoice yet while other have and wanted to ask when I can expect it? I want to pay for it pronto
    August 2015
  • mlyau
    Hi Andrew, since I'm still waiting for my resin and don't have any news from your guys, should I start to purchase the resin from other company? it's no use for me to looking at the printer and do noting, I don't even know if it is working or not!!! Looking for a prompt reply. Thanks.
    July 2015
  • Weav
    Hi Andrew,  I would also like my profile updated to Backer status please, so I can learn more from fellow backers, my Kickstarter ID is Cleaver Brinkerhoff.

    Thanks!
    July 2015
  • Christian

    Hi Andrew, Could you please update my profile to backer status? My kickstarter ID is Christian Lemire.

    Thank you!

    June 2015
  • izmn

    Hi Andrew, Could you please update my profile to backer status? My kickstarter ID is Aya Tamai.

    Thank you .


    June 2015
  • Thijs
    Hey Andrew, Could you please update my profile to backer status? My kickstarter ID is Thijs de Bruijn.

    Thank you in advance
    June 2015
  • Edward
    Hi, 
    I am a backer on kickstarter and I would like to have that in my status here as well. My id on kickstarter is Edward Avram. 
    Best wishes!
    May 2015
  • Kaan
    Hi,

    My Name is "Kaan Kutsaldogu" that is also my Kickstarter.com ID, actually I signed in to your forum a couple months ago. 

    But I am not sure, did you add me to the backers list or not?

    I am one of the backers of your project and I pledged 1.799,00

    PS: and also, I really would like to know, when will you start sending out the DRAKEN1 or when will you get in contact and is the teflon resin tank included as standard or optional?




    May 2015